‘brakes’ Tagged Posts



I own a golf cart that was an extra cart from a golf course. I know that there is a safety control/safety clip in the engine that automatically makes ...
I own a golf cart that was an extra cart from a golf course. I know that there is a safety control/safety clip in the engine that automatically makes the brakes slow down the cart if your going over 20 mph. But if you take the clip out then the cart won’t slow down. I wanna know where the clip is, how long it will take to get it out and what tools I would need. I hope someone helps.
EXTRA info,
it is an EZ-GO cart
its only 1 year old
THANKS
Tags: brakes, golf cart, golf course, safety control
Posted in Go Cart Engines | 1 Comment »
all of the sudden when I hit my brakes in my golf cart the left rear wheel gets locked up and wont realease, after hitting the pedal a few times it does but goes back to the same situation when I brake again, those are shoes brakes and they are activated by cables, is time to change brakes?
or it may be that the cables are rusted? any ideas.???
Tags: brakes, cables, golf cart, rear wheel, shoes, wheel
Posted in Pedal Go Cart | 2 Comments »
about 2 months ago at night some friends and i used some illegal drugs (cannabis) and i was riding on the back of a golf cart (with 4 seats, 2 on the back and they had those railings that go along the sides and the corners and stoped in the middle so you get in and out.) well im riding on the back standing up holding on to the bars. we were all in a different mindset because of the drugs. but we rode up the street a little and hanged u-turn, started down to a circle culdasac which is downhill a little, well were flying down there pretty fast the driver slams on brakes and turns sharp to the right on a dime i fly my left leg hangs over bar with my foot pinned under the seat and i fall over and like hang after my head smacks the asphalt going about 20mph i dont get knocked out, i get to my feet i feel dazed and light-headed no blood or anything but my neck and back of head ache bad. when i get home in the middle of the night i have my mom drive me to the ER i get a cat scan and temp neck brace.doctors said everything is fine til this day my neck hurts but im worried somthing is still wrong .and now i have been going to the chiropractor twice a week since . is there anything the could have overlooked or is there anything else i should be worried about even though it was 2 months ago? please let me know……thanks
Tags: asphalt, brakes, cannabis, cat scan, chiropractor, culdasac, doctors, fly, golf cart, illegal drugs, left leg, mindset, mom, neck brace, railings, riding on the back, slams, stoped, u turn
Posted in Go Cart Seat | 2 Comments »
I drive a 1995 Honda Civic 1.6L. When I press the clutch or brake the idle goes down and the cart rumbles and dies. So stopping is a pain. I was told there was a vacuum leak and it might be the power brake booster. We have replaced the booster, master cylindar, and brakes. The mechanic is trying to solve by "process of elimination" and it costing more each time. I dont want to spend 300 to fix the booster if it isnt the problem. Any ideas where this leak could be?
Tags: 1995 honda civic, brake booster, brakes, cart, clutch, cylindar, honda, honda civic, mechanic, power brake booster, process of elimination, vacuum leak
Posted in Go Cart Cost | 2 Comments »
I am really wondering how to attach the engine from a lawnmower.I would love a diagram of how to build the accelerator pedal and brakes..If i have to weld then i will..but im not really concered with the body.I am more concerned how to do the engine work..like gears,brakes,etc. with stuff i could find in the hardware store.
Tags: accelerator, accelerator pedal, brakes, gears, hardware store, lawnmower
Posted in Go Cart Engines | 4 Comments »
i am very bored at home so i want to build a go cart can u give me ideas on what kind of parts to use or help me with chosing a go cart deign i don’t want to make the design of the cart to complicated i want it nice and simple so that all it does is drives and turns i will figure a way out how to make brakes
Tags: brakes, go cart
Posted in Go Cart Parts | 1 Comment »
i recently bought a go cart for . it has an awesome body, suspention, brakes and tires. it has a tecumseh engine in it (195 cc); the engine needs a new spark plug, and a carbulator. i will want to just get a new carbulator, instead of a new engine. i do not know which one to buy, or how to install it. if there is website where they sell them can you list it for me and also tell me how to install it.
The Model # Is OHH65
Spec Is 717120
Again it is a Tecumseh ( 6.5 hp or 195 cc)
THANK YOU SO MUCH FOR YOUR TIME
GOD BLESS YOU
Tags: awesome body, body suspention, brakes, go cart, hp, new spark, spark plug, tecumseh engine, time god, tires
Posted in Go Cart Tires | 2 Comments »
i have a 2 seater go-cart that has the cage around it which is cool. right now it wont start thought. thats the only REAL problem. other than that the tires are getting wore out and the brakes either need to be tightened or something. i have no clue cause it was given to me so i dont know much about it. so about how much do you think its worth?!!
Tags: brakes, clue, go cart, tires
Posted in Go Cart Tires | 1 Comment »
My battery operated golf cart can be running along and it will keep coming to a halt as though u have appied the brakes, then just press the gas pedal and off u go, but it does it continuely only when u press the gas,coasting along it doesn’t, can some one help
Tags: brakes, gas pedal, golf cart, u press
Posted in Pedal Go Cart | 2 Comments »
I want to keep the orginal gears on the bicycle so i can save a bit of fuel. I could guess that the motor would have to have a mount on the back and some welding would be required. Also would i have to upgrade the brakes to slow down faster due to the increased speed and momentum? wow, if this works, I will be burning tires on my huffy!!!
Tags: bicycle, brakes, burning tires, gears, momentum, tires
Posted in Go Cart Engines | 2 Comments »
Hi we are making a go-cart for school, we found some websites like northerntool.com that sell parts for go-carts, but getting it shipped to canada will cost a lot because of customs and stuff. So we were wondering if there were any canadian websites like that. We are looking for centrifugle clutch and brakes (any kind). Thanks for your help
Tags: brakes, canada, canadian websites, clutch, customs, go cart, go carts, kind thanks, thanks for your help
Posted in Go Cart Parts | 2 Comments »
It has a very small gas engine on it. The small cart goes about 15 MPH. Throttle and brakes are mounted on the steering wheel. I was given 4 of the carts that someone wanted to get rid of. They are supposed to be about 3 or 4 years old. I cannot find a serial or model number any where on the cart. I’m looking for information on how to order the little transmissions for the cart, I need at least 2 of them. The motors on them run excellent, but the clutches slip on 2 of them. That’s really all of the information I have on them other than the little engines on them are 4 stroke, and I can’t read or make out who made the engines.
Tags: brakes, cart, clutches, little engines, model number, steering wheel, stroke, transmissions, wheel
Posted in Mini Go Cart | 1 Comment »
Ive tried to think of a way to make the pedles but if it goes to fast, it would cut off our legs i could just make it electric but it would be harder i need a simple to build design that has brakes, steering, pedles or a engine, and it has to be big enough to fit atleast 4 people. lol i wanna go fast down a hill. (: 
Tags: brakes, legs
Posted in Pedal Go Cart | 1 Comment »
After I build the frame, would i be able to build the rest (steering,rear axle, centrifugal clutch, brakes system, gas pedal system, etc) from an old car sitting in the trees? If I took all the parts from the car? I plan on using an auger engine or maybe an old lawnmower or dirtbike engine.
Tags: brakes, centrifugal clutch, clutch, lawnmower, rear axle, trees
Posted in Go Cart Parts | 2 Comments »
want to sell a gocart frame and I would like to see about how much I can get for it. I has some rust but in great shape it has all the wires and brakes It has a great seat with no rips But the ingen does not work
Tags: brakes, great shape, rips, rust
Posted in Go Cart Frames | 1 Comment »
want to sell a gocart frame and I would like to see about how much I can get for it. I has some rust but in great shape it has all the wires and brakes It has a great seat with no rips But the ingen does not work
Tags: brakes, great shape, rips, rust
Posted in Go Cart Frames | 1 Comment »
I want to sell a gocart frame and I would like to see about how much I can get for it. I has some rust but in great shape it has all the wires and brakes It has a great seat with no rips But the ingen does not work
Tags: brakes, great shape, rips, rust
Posted in Go Cart Frames | 3 Comments »
battery has a good charge.
Solonoid box just clicks but will not start engine.
Pull start will not start engine either.
My dad checked the spark plug wire and there is no currant coming from the spark plug wire. This is a brand new just assembled 50cc gocart and I don’t know what else to do, Im getting no response from customer service from the company I ordered it from. Any suggestions? My son comes home in a couple of days from his dads and this was to be his birthday present but I have no idea what to do!
HELP!
The specs are:
Engine 50cc Air Cooled, 4-Stroke, Single Cylinder Chain Driven!!
Max Power 3.5 HP (EST)
Ignition 12v / 9A CDI
Start Pull Start
Transmission Dry-auto acentric
Dimensions LxWxH 59"x37"x42"
Seat Width 23"
Dry Weight 162lbs
Tires 13×5-6 Front / 14.5×7-6
Brakes Foot Brake (Rear Disc)
Top Speed 21 mph
Wheel base 43"
Fuel Capacity 2L
*my dad said there is "no fire to the coil"..or maybe he said there is no fire FROM the coil…something like that.
The exact gocart and the website I ordered from is :
http://www.globaltrailer.net/50cc-Youth-Go-Kart-Deluxe-p/50cc%20youth%20go%20kart%20deluxe.htm
Tags: 9a, brakes, couple of days, currant, customer service, dad, dads, fuel capacity, gocart, hp, max power, rear disc, seat width, spark plug, spark plug wire, stroke, tires, top speed, wheel, wheel base
Posted in Go Cart Engines | 1 Comment »
Tags: appearance, brakes, coworker, coz, derivatives, doubt, driving experience, honda, honda hatchbacks, last car, last resort, mileage, rabbit, safest cars, small car, t test, volkswagen, volkswagens, volvo
Posted in Buy Go Cart | 4 Comments »
i made the go cart frame myself and then i built up my go cart and put on a 18.5 hp lawnmower engine and it goes about 70 mph top speed i also have seat belts, turn signals in the front and back, brakes, brake lights, and headlights i put about 2 years of work into the go cart and i think it would be pretty cool to make it street legal so is there anyway i can do this?
Anybody have some (USEFUL) information?
Tags: brakes, cart frame, go cart, headlights, hp, lawnmower engine, seat belts, signals, street legal, top speed
Posted in Go Cart Engines | 2 Comments »
5hp Briggs and Stratton Motor. Fires up fine. But when I apply brakes its like im power braking. I have to kill engine to stop gocart. WHY? please help
Tags: 5hp briggs, brakes, briggs and stratton, power braking
Posted in Go Cart Wheels | 3 Comments »