So im going to the fair in two days so i drove bye it today to see what they had for rides. My friends told me they didnt have the zipper this year which is my favorite. i seen this new ride that was about the same size as the sky diver with what looked to be zipper carts. and since the zipper isnt there this year could this be a new version? it was just a plain old circle frame like the faris wheel with enclosed carts clearly not a sky diver or a faris wheel. it was dark and the ride wasnt going yet but it was lit up and the "spokes" like the bicyle spoke were lit up bright blue and i couldnt make out the name could any one give me the name to what it is or a link? thanks

its for a project im working on for science fair (i started earlier because i want to try to win), it needs to carry 100 pounds and what kind of battery do i need and what kind of motor, and how do i hook the motor to the back wheel, i can figure out the rest my self.

Where can I find one? Preferably one with a steering wheel. Basically a pedal go cart

I passed this 3 wheel vehicle on The street And was wondering what it is And how much it cost. Im sure it isnt a spyder or a t-rex. It has 1 wheel in front and 2 in back. 2 people ride in it. It looks really new And modern…it looks alot like a snow mobile on wheels. The people were sittin kind Of deep in it like you could only see them From chest up. It might have even had doors. Please tell me if this sounds familiar.

You know with the air conditioning lights a stick pedals seat covers wheel cover a new moter and if I take the cover off the go cart how do I make a new one also will I need a better motor and wheels also I want it to have a radio with speakers and also finally I want custom doors on it along with a new paint job and a built in phone for calling how do I put that into a golf cart?

i am making a small 3 wheeled craft using old bike frames, and bike tires. all told i’m expecting about a 120 pound cart, powered by front wheel drive (tadpole design – 2 wheels in front, one wheel steering in back). say a max of 200 lb rider (just to be safe)

i’d like to go electric. i wonder what would the optimum brushless dc motor be for this vehicle to reach speeds of around 50 mph? (what HP, what RPM rating… all the other electric stuff like amperage)

also, what would the best batteries be to operate this craft for around two hours? (i’m mostly looking for the electrical stuff. i’ll figure out what type of battery, but the electrical numbers and stuff are a little rough to figure)

I just want to build a go-cart out of wood with a steering wheel also. any ideas???

A cart of mass M moves on a frictionless track. It is attached to a string, which goes over a pulley wheel and has a mass m hanging from it. At t=0 s, the cart starts from rest and accelerates. What is the tension in the string? What is the acceleration of the cart?

all of the sudden when I hit my brakes in my golf cart the left rear wheel gets locked up and wont realease, after hitting the pedal a few times it does but goes back to the same situation when I brake again, those are shoes brakes and they are activated by cables, is time to change brakes?
or it may be that the cables are rusted? any ideas.???

There is a wheel shop and it sells bicycles and go-carts. Each bicycle has only one seat and each go-cart only has one seat. There are a total of 21 seats and 54 wheels in that shop. How many are bicycles and how many are go-carts?
please please help me and explain to me how to get to the answer. thanks

I just built a go cart with a 6.5 hp engine. It’s for my 7 year old daughter, and it’s just a little too fast for me to turn her loose on it. Is there any way I can slow this down without changing the throttle cable or sprockets?

I know NASCAR uses restrictor plates … is there anything like this for my motor?

Here’s some useless information (maybe it’ll help). I’m using a motor from Harbor Freight Tools, and a 12T chain clutch from Northern Tool. The engine is one of those new cheap ones from China that’s a rip off of the Honda versions. I also have a 60T sprocket on the drive wheel.

Ok so i asked a question not long ago about if my 20 yr old pony was too old to learn to drive, and i got some positive feedback.
So, i was hoping someone had a step by step guide to making a 2 wheel horse cart
It can just be a guide of all th e peices needed, and which part goes where………..
My dads a welder and i am going to ask for my birthday (its in 3 months) if he can make me a cart for my learning pony.
I will just do a bit of ground driving and some tips i got from people until then.
Thanks for any help.

My kid hit curb, and I don’t know much about golf carts. What could have possibly happened? When you are driving straight, and you let go of the wheel, it will almost make a u-turn! Please help!! Thanks

I have an old Club Car golf cart. The engine is in the back (obviously), I was thinking it was RWD. I was going up a hill and only the right back wheel was spinning, I was thinking it was just like the other wheel couldn’t force spinning because of the engine being only how many HPs they have. I saw that the drive shaft was going to the back wheels, so is it really RWD? And what are some cool tricks you can do with a golf cart?

I am making a a cart for my sister’s team, and we would like to put a car stereo in it, but i am not sure how to get power to it, or even what to use to power it. It can’t be plugged in b/c it will be going from car to field and back; however, it is possible for it to be charged when not in use. Also i would like it to be low cost.

Would something like a scooter battery or wheel chair battery work?

Also a diagram on how to wire it or a link would be great!

Thank you for any help!

like 3 years ago i went to wisconsin dells and was riding on the go-carts. the track i was riding on was particulary bumpy and i held on to the steering wheel very tightly and all of the shock from the bumpiness came to both my wrists. i went to many doctors and they all told me to ice and use anti-inflamatories and it didnt help. so what do you think is wrong with my wrists and what can i do about it?

just wondering if an engine we have would work for a go cart. I don’t know the wheel size yet, but i would imagine something like 12" rear wheels at the most.

I was wondering if the gear ratio is the same on the engine as it is on the axle ( running with a chain ) How fast do you think it could go with a 4 horsepower engine? Its a standard 4 wheel golf cart and I may cut some plastic off. Could anyone help me out?
Thanks very much! I was just asking cause I already have the engine and am getting a golf cart so I was wondering if it would be worth it but if you ever look back could I ask what size of engine I should get to make the Golf Cart go about 50 – 60 km/h? Because I wanna have a little fun! Thanks so much!

So I researched the chinchillas. And found out they are exactly wht ive been looking for. I already have a dog. But i love small animals. and i love exotic animals too. I plan on getting the chinchilla from a rescue. Well i plan to get a pair for 120 at a shelter. And to get a estimate on how much it would cost. I went onto petsmart.com and i put all the basic needs in a cart. Just so i can see what the cost would be for all the stuff. And my total was 2 that is not including the chinchillas. Is that too much money or is that the normally amount of all the basic needs for a chinchilla.
2 is the cost for these items
Cage-8 (huge cage)
Large flying saucer wheel-
sleeping e-tent-
Bath house-
Litter-16
book on chinchillas-11
food-9
dust bath-8
water bottle-7
chew stuff for their teeth-4
ceramic bowl-2
litter box kit-11

And all of those items are highly reviewed either 3 or 4,5 for the chinchilla.

I am just looking into chinchillas it is not for sure. And for the items i have. Is there anything i should have. Or is there anything i have that i dont need?

I am going to read the book on chinchillas before i buy any of the stuff and before i get chinchillas (if i do get some)

First you should know I don’t have much experience with harness/driving horses/ponies – hence this question. Up until recently I thought you just picked a cart that looked about right. Now I’m seeing the different shaft lengths, wheel heights, etc. as going with different size horses. I have a 15hh horse that I want to put in harness, what size cart will I need(wheel height, shaft length)? Also have a Shetland that will probably mature around 10+ hh, a cart that works for mini’s will work for a small pony right? Or again what size do I need? Thank You!
I am planning to get two separate carts. One would be cheaper but I know better…

Does anyone know where I can buy mario cart racing with Wii wheel for Wii. Everywhere I go it’s sold out. Also if you know where I could order it that would be great too. Thanks

Just purchased a 1985 E-Z GO 3 wheel golf cart looking to find where can find parts and accesories for it

mine is when i was running barreles when i was 12, i did good through the first to barreles but o the third my headstall fell apart! he ran for the gate and did not stop till he was a bout 3 feet away from the fence, i did a cart wheel over his head over the fence! it did not feel good i had to go to the hospital, i landed on a rock and it cracked my knee cap.

whats yours?

I want to try out for cheerleading at the beginning of April but I really need some tumbling like back handspring and stuff. I am going to take tumbling classes but I do not know how many times I will need to go a week to get a back handspring by beginning of April. I am a beginner and can barely do a cart wheel. Please help.

Got a wooden frame go cart about 4 inches from the ground… (STreet rideer) and we are wondering if there is any way to set up a better steering system then we got… possible a steering wheel???

I found one kit but I am not sure if would work going with the wooden frame… Here is the link.

http://gokartgalaxy.com/parts_12.jpg

Would it?

Thanks guys and gals :]