i have a go cart that is a 2 wheel drive (rear wheels) it is built very sturdy and has suspension. i would like to know if it would be possible to put any kind of small dirt bike engine on it (50-150cc) and if so how hard would it be to hook up and mount.

I’m going to buy Mario Cart Wii soon and I’m just wondering how necessary the wheel actually is for the game. I know that you don’t absolutely need the wheel to play, but does it make it alot easier or something? I just want to know if it’s worth spending the extra money to buy the wheel?

ok well im doing dance competition next year and all of this stuff is required to be able to do. well we were going to do these at competition auditions but we didnt get to them (thank god!) well i cant do any of this stuff. i am close to a aerial because i can do a 1 handed cart wheel but i cant do the aerial or both of the hand springs. and i cant go to a gym im on my own except i can get my sister to help me every now and then. so how can i do this? thanks!

I live in Iowa and I wish to take a Metro XFi engine and transmission and put it into a tubular steel frame and make it a rear wheel drive ‘sand-rail’ I guess you’d call it. I’m wondering if this would be legal if I put in headlights, brakelights, and turn signals and then registered it (with who and as what?).

The wheel that makes the thing go wore down to nothing, and now it has a big crack in it. It needs to be replaced, but I have been unable to locate a place where I can buy parts for it. It is the 6 volt model.

I know how to do a cart wheel and a back bend, but when i go backwards i’m always to scared, one time i went backwards and hit something and hurt myself, I’m really scared now, how do I over come my fear? How did you learn?

I find it very odd that every time I go to Publix they ask to help wheel my cart to my car. I am not a senior citizen, nor am I disabled. Usually I only have one or two bags in the cart, and I leave the cart inside the store and walk my bags out myself. Do they have some kind of across the board company policy that they have to ask everyone if they want this service?

My cousin is a very good gymnast but she does not go to gymnastics. She wantz to know if she iz to old to join. But remember she never went to gymnastics and can front flip, splitz, handstand, high kick, round off and back hand spring and cart wheel, is she too old?

Take a left, lay down, log roll two feet, stand up, and do a cart wheel, would you survive?

Or would you go down your stairs, into a wall, etc..?

I have a 6.5hp horizontal shaft engine and a 0 budget. I have a picture of what i would like the final shape to be. (a reverse trike frame steering in the front rear wheel drive and if possible it be a 2 seater [300lb capacity]) any help would be great. If you think i need a bigger motor to have that capacity please say so.

Is mario cart wii going to come with a foot pedal? cause i know it comes with a steering wheel.

just curious……
i went to the hospital 3 times in my like and im only 13! ( not including birth ha ha)
once because i had food poising
second because i touched the stove with my bare hand! ( ouch)
third because i broke my ankle doing a cart wheel ha ha!

I’ll try to describe: Imagine a two-wheel dolly with little (8" tall x6" wide) fat tires/aluminum rims, and a metal box with a lid (instead of a flat platform) that holds a car battery. A pair of thick cables run from the battery box to an engine starter (automotive size). The starter is mounted perpendicular on a bar shaped in a half circle (to be able to pick up & hold the starter) that also has a push-button/ solenoid setup attached where your right thumb could press. At the business end of the starter, instead of a gear (like a car starter) there is a flat disc with teeth. Also on this end is a smaller, flat metal, half circle piece for attaching the starter to whatever you want to spin or turn. So – you can pick up the starter, attach/ mount it temporarily to some kind of motor/engine/gear/something, press the button and make "something" spin. There are a few more idiosyncracies, but maybe you get the idea. Any thoughts? Have pics,Hope someone knows! Thanks in advance!!

I am desperately trying to find my little boy the Mario Cart game with the Wii wheel. Everyone in my area is sold out! I went online to Target, WalMart, Toys R Us, and no luck! I ordered it from a guy on Ebay and he never sent it! Anyone have any ideas?

it’s the pulling wheel

okay so im an allstar cheerleader and i just started in novemeber. ive never cheered before, but i love it now!! i go to privates every week for tumbling because as of right now, im not a tumbler. i cant even do a cart wheel!!! so im pretty pathetic. could you please tell me some techniques on not bending my back leg during a cartwheel. i will say my cartwheels have gotten much better from when i first started, but now my only problem is that i ALWAYS bend my back leg! i dont know how to stop and it is sooo frusterating. my coach is telling me to squeeze my body and point toes and kick fast but its just not working for me. please please pleaseee help me with some techniques!!! thanks

I have an old 360cc 4 cycle engine I want to put into a 4 or 3 wheel configuration.
Optimum would be a Big Wheel for an adult.

With bearings in the wheel, wouldnt a live axel just spin and not move the wheels? Do you know of any specific websites where they sell wheels with a 5/8 or 3/4 bore in them. Also, if the bore is too big in the wheel for the axle size, is there any part to make them fit besides bearings?

It has a very small gas engine on it. The small cart goes about 15 MPH. Throttle and brakes are mounted on the steering wheel. I was given 4 of the carts that someone wanted to get rid of. They are supposed to be about 3 or 4 years old. I cannot find a serial or model number any where on the cart. I’m looking for information on how to order the little transmissions for the cart, I need at least 2 of them. The motors on them run excellent, but the clutches slip on 2 of them. That’s really all of the information I have on them other than the little engines on them are 4 stroke, and I can’t read or make out who made the engines.

battery has a good charge.
Solonoid box just clicks but will not start engine.
Pull start will not start engine either.
My dad checked the spark plug wire and there is no currant coming from the spark plug wire. This is a brand new just assembled 50cc gocart and I don’t know what else to do, Im getting no response from customer service from the company I ordered it from. Any suggestions? My son comes home in a couple of days from his dads and this was to be his birthday present but I have no idea what to do!
HELP!
The specs are:

Engine 50cc Air Cooled, 4-Stroke, Single Cylinder Chain Driven!!
Max Power 3.5 HP (EST)
Ignition 12v / 9A CDI
Start Pull Start
Transmission Dry-auto acentric
Dimensions LxWxH 59"x37"x42"
Seat Width 23"
Dry Weight 162lbs
Tires 13×5-6 Front / 14.5×7-6
Brakes Foot Brake (Rear Disc)
Top Speed 21 mph
Wheel base 43"
Fuel Capacity 2L

*my dad said there is "no fire to the coil"..or maybe he said there is no fire FROM the coil…something like that.

The exact gocart and the website I ordered from is :

http://www.globaltrailer.net/50cc-Youth-Go-Kart-Deluxe-p/50cc%20youth%20go%20kart%20deluxe.htm

I had a honda odyssey fl350 go cart that i stripped and now im left with some parts.

correct me if im wrong with the names of any of the parts

Here is the transmission with the rear axles.

http://www.flickr.com/photos/26669397@N07/3115981481/in/set-72157611370195600/

This next part is this. It is the axle for the front wheel and the front shock.

http://www.flickr.com/photos/26669397@N07/3115982151/in/set-72157611370195600/

this is the rear shock

http://www.flickr.com/photos/26669397@N07/3115982527/in/set-72157611370195600/

then is the belt

http://www.flickr.com/photos/26669397@N07/3116805002/in/set-72157611370195600/

next is the handbrake

http://www.flickr.com/photos/26669397@N07/3115978269/in/set-72157611370195600/

next is the carburator with throttle cable

http://www.flickr.com/photos/26669397@N07/3115978695/in/set-72157611370195600/

next is the shifter

http://www.flickr.com/photos/26669397@N07/3115978811/in/set-72157611370195600/

next is the steering column

http://www.flickr.com/photos/26669397@N07/3115980807/in/set-72157611370195600/

lastly is the engine

http://www.flickr.com/photos/26669397@N07/3116806656/in/set-72157611370195600/

if i were to sell these what do you think they would be worth on ebay. If you can just help me out for one of them that would be great. Also would you check to make sure i named everything right. Would the rust be a big problem. I was gonna take the electric steel brush and take what i can off.

any advice would be very helpful.

here is the whole set if you want to see more pictures.

thanks!!
also if i have it shipped via ups, can i have them pack it for me and provide me with a box. do they charge extra for packing it. If not how do you reccomend me packing something that big?

thanks again

okay i have a gocart that has a snowmobile clutch on it, thats what i think its called the weel spins and once it hits a certain speed it grabs the belt and turns a wheel witch moves trhe chain, i was wondering what i need to buy to replace that belt and do a straight chain to the axel sprocket someone told me about something called an idler sprocket or sumtin like that, what do i need to buy?

hi iam trying to make a gocart out of a old fram of mine i need a new motor and braks are bad and it 1 wheel drive.plz help.my working go cart got stolen and iam trying to buld a new 1 plz help with motor size and ect i need like plans